WIIBOOX SLM150 METAL 3D PRINTER

Category:

Description

 

Laser System

Type:Fiber laser Wavelength:1064nm

Power:200W / 500W

 

Recoating System

Process:scraper paving Normal Build:0.05mm Quick Build:0.05~0.10mm

Precision Build:0.02~0.05mm

 

Optical & Scanning

Beam (diameter@1/e2):0.04~0.15mm

Scanning Galvanometer:High Speed Scanning Galvanometer Parts Scanning Speed:1.0~2.0m/s (recommended)

Blank Jumping Speed:10.0m/s (recommended)

Reference Building Speed:2~15cm³/h

Shield System Protective gas:N2 / Ar

Flow Control:0~3L /min intellient adjustment

Dust extraction control:High efficiency Protection recycling system

 

Build Vat

VolumeApprox: 4.5L

Size:150mm(X) × 150mm(Y) × 200mm(Z) Max Weight:20kg

Type:Precision resistor heater

Materials:Stainless Steel / Die Steel / Titanium Alloy / Aluminium Alloy

/ Co-Cr Alloy / Nickel Alloy / Cuprum etc.

 

Software

Network:Ethernet, TCP/IP, IEEE802.3 Control Software:iSLM(Presto SLM) Date Preparation Software:3dMagic Data Interface:CLI file, SLC file, STL file
 

Installation Condttion

Power:200~240VAC 50/60Hz, single phase, 15Amps Ambient Temperature:20-26ºC

Relative Humidity:Less than 40%, non-condesing Size:1.55m(W)×1.10m(D)×1.90m(H)(Operating computer is not included) Weight:Approx. 1000kg

Warranty Laser:5000 hours or 12 months (whichever comes first) Main Machine:12 months from installation date